Wonder what exactly water damage and mold restoration is? You may already know, when your home suffers from water damage, there is a big mess – and a large job – on your hands. The procedure of repairing your home to its pre-loss condition after a flood, overflow, or other water damage event is known as water damage restoration. During the water damage and mold restoration process, several key methods take place: loss assessment, categorizing water based on the water source’s contamination ranges, drying and decontaminating the framework and its contents, monitoring the process, and completion.

Before any restoration work is undertaken, it really is first evaluated so that a proper response is taken. For instance, if you were considering obtaining and restoring a classic car, you’d need to know exactly what you are coping with and where to begin. When it comes to water damage, not only must the technicians fully understand the task before them, insurance companies are often involved. Not merely must a water damage and mold restoration technician understand what is damaged and what needs to be done, the damage should be thoroughly inspected and documented and accurate estimates made. The foundation of the damage must be identified so that necessary repairs can be made.

Within the assessment, water is categorized using the contamination levels (Category 1, 2, or 3) of its normal water source. For instance, water damage from the clean source such as an overflowing sink is easier to deal with when compared to a water source containing raw sewage. The categories are as follows:

o Category 1 – Drinking water from clean sources such as sinks, pipes, and toilet bowls (without urine or feces)

o Category 2 – Drinking water with some contaminants such as for example water from a washing machine, dishwasher, or toilet with urine (but no feces)

o Category 3 – Water that is extremely unsanitary, with the capacity of causing severe illness or passing away if the drinking water was ingested. Examples of Category 3 drinking water include sewage, water from a toilet bowl made up of feces, floodwaters from rivers, and standing water with microbial growth.

Keep in mind that the foundation water may have originally been fairly clear and sanitary, but it can quickly touch unsanitary contaminants and be Category two or three 3 water.

Water damage usually affects not only the immediate area but also the home’s contents. Water damage and mold restoration technicians must also deal with furniture, drapes, carpets, electronics, books, and other contents affected by the water. Some of these contents will be moved before the water gets to them in an attempt to prevent damage, others will need to end up being dried, cleaned, and decontaminated, among others still will be damaged to the point where they must be discarded.

Finally, the drying, washing, and decontaminating process begins. During this time period, equipment such as for example blowers, scrubbers, subfloor drying equipment, and dehumidifiers are put into place and left for many days with the drying procedure monitored to make certain the all equipment is placed appropriately and working as it should. Humidity levels, temperature ranges, and moisture content of infected areas are monitored with additional drying continuing as needed. As well as drying, cleansing, decontaminating, mold inhibitors may be used to prevent mold from expanding. Deodorizers may also be required. Even if the water damage was from a Category 1 water resource, contaminants in carpets and the underlying carpet pad can quickly lead to a foul odor.